2020+ Explorer ST MRT Sport Touring H Pipe

The Explorer ST MRT Sport Touring H-Pipe Exhaust will enhance your driving experience by adding a sporty, refined, on-demand sound to your overall exhaust note. This exhaust replaces the mid-section of the OE exhaust after the emissions hardware. With this Explorer H-Pipe performance mod, you will experience a slightly increased loudness level versus stock exhaust so you can hear the whistle of the EcoBoost turbo. You also control the amount of exhaust presence as it gets louder when you accelerate, then rumbles in the background at steady-state cruising.

A Ford Explorer ST H-Pipe works much like a resonator delete, allowing more of this SUV's exhaust notes to shine through while also reducing backpressure compared to an X-pipe. The result is a small but noteworthy boost in sound and power. It's a great upgrade to step up the performance and fun factor of your ride. To Hear the Difference for yourself, check out the MRT videos below or buy one and install it to personally Feel the Performance.

Introduce Yourself to a Better Explorer ST Exhaust

Designed for sixth-generation Ford Explorer ST vehicles made from 2020 onward, an Explorer EcoBoost H-Pipe is a great option for anyone who wants to fine-tune their SUV's sound or is on a budget. It's one of our most affordable aftermarket systems and can be used with a replacement axle back exhaust if you want to go to the next level.

This MRT H-pipe is handcrafted in the highest-quality premium corrosion-resistant 2.5-inch T304 stainless steel. The design is a resonator replacement H-pipe configuration that is engineered to provide the best sporty sound to match your Explorer ST. The increased tube size increases performance from the improved exhaust flow and gives just enough elevated sound to Get Noticed. All H-pipes are made in the U.S. and inspected a minimum of four times before they leave our Michigan shop to ensure they meet MRT quality standards.

A Gen 6 Ford Explorer ST H-Pipe is certainly packed with plenty of opportunities to Feel the Performance while packaged in a design without an excessive drone. It's easy to install, too - all DIY hardware is included, and most people can complete the job in 60 minutes or less using standard hand tools. You don't need to tune your exhaust, either. Click on the "Installation Instructions" tab for a step-by-step guide that includes photos.

Other Ways to Upgrade Your Exhaust

To kicks things up a bit more, pair this MRT H-pipe with the MRT Extreme Axle Back 90R225 for a max-performance sound combination. If you're interested in a fuller exhaust note, MRT offers two cat back exhaust systems with two different exhaust sound ratings - the MRT Extreme Cat Back and MRT Sport Touring-Cat Back. Also, for the full MRT effect, add MRT Explorer Hood Struts (part number 80K102) to eliminate that prop rod without drilling holes in your vehicle! Call or emails us to learn more.

Application: 2020+ Explorer ST 3.0L EcoBoost

Hear the Difference

• How does it sound? The MRT Explorer ST MRT Sport Touring H-Pipe provides a refined on-demand sound and increases loudness when you want it.
• Is there drone or resonance? The drone is noticeable but tolerable.
• What if I step on it? Wide-open throttle brings out a sound with a livelier attitude, more bite and a deeper growl.

Are you located close to Plymouth, Michigan and need your MRT aftermarket exhaust installed? Call MRT at 734-455-5807 to make an appointment today!

• Classic H-pipe exhaust design for improved gas flow and reduced back pressure
• DIY installation for the backyard mechanic
• T304 stainless steel construction for the best corrosion resistance
• Engineered, designed and manufactured in the U.S.

• What kind of steel is it made from? Corrosion-resistant T304 stainless steel.
• Where is it made? Developed and handcrafted in-house at MRT facility in Plymouth, Michigan, USA.
• How long is the Warranty? Limited Lifetime Warranty (See Warranty Page for Details)

• What is the muffler design? Straight through design to provide maximum exhaust gas flow.
• What is the tube diameter? A large 2.5" tube is used for reduced exhaust flow restrictions.
• What are the performance gains? Reducing restriction and maximizing flow provides for noticeable gains.

• What kind of tip is it? There are no tips on this system.
• What are my tip finish options? None.
• How do I get noticed? Great sound and great looks turn heads and get positive comments!

• Can I install this myself? Yes, MRT engineers this Premium Exhaust System for a simple do-it-yourself (DIY) installation.
• How long does it take to install? Installation time is about 1 hour and requires common hand tools.
• What is included? All necessary hardware included.